- Simple Design
- 4.3", 5.7", 7" and 10.2" wide-screen sizes TFT color LCD
- Wide variety of communication interfaces
- 2~3-channel serial communication
- Ethernet
- Large memory for drawing (64MB)
- RTC function (maintained by battery)
- Convenient downloading/uploading of drawings via USB port in the front
- Logging, Alarm, Email, etc. functions
- EX and IP65 Certification for 7" and 10" units
-
Effective Control and Monitoring with the Cost-Efficient eXP series HMIs! -
The new and faster eXP2 has arrived! The form factor remains the same, but the performance ...enhanced.- Screen sizes of 4.3", 10.1"
- PDF viewer
- FTP client
- Remotely monitoring PC or HMI using VNC viewer
- Multi-touch setting to prevent malfunction
- Micro SD card - backing of data such as alarm/logging/recipe and storage of screen data
- Depending on touch sensitivity, you can set it up with bare hands or gloves
- Dual-Core CPU offers high-speed communication and processing
- LCD life time increased by 2.5 times
- Compatible with eXP (panel cut, project file etc.)
- Setting in XP-Builder: (Common - Project Property Setting)
-
G100 General Drive- Input 3 phase, Output 3 phase
- 0.4kW ~ 22.0kW 3ph @ 380~480V AC
- Build-in EMC filter C3 option
- Build-in Potentiometer
- DIN-rail mountable for 0.4kW ~ 4.0kW
- Side-by-side installation
- Remote Keypad
- Build-in MODBUS (RS485) communication
- Fieldbus options; Ethernet/IP, CANopen and Profibus-DP
- Powerful features
- Torque Boost
- DC Breaking
- PID Control
- Energy Saving Operation
- 2nd Motor Operation
- Draw Control
- DriveView 9 Software
-
HVAC, Pump and Irrigation systems benefit from outstanding energy-saving characteristics of the H100.- Input 3 phase, output 3 phase
- 0.75kW ~ 500kW @ 380~480V AC Mains
- 0.75kW ~ 500kW @ Solar 450~790V DC PV
- Standalone, Changeover or Hybrid Modes
- Large Keypad with exclusive for Pump and Fan with 3 line display.
- Wireless Radio Communication via RS485 Modbus RTU
- Communication RS485, BACnet MS/TP & Modbus-RTU, Metasys N2 build-in
- Communication I/O option module LonWorks
- Flange mountable for fans outside of enclosure
- Powerful features
- Solar 6x Delay Adjustable Voltage Retries
- Solar Maximum Power Point Tracking (MPPT)
- Soft Fill Operation
- Start Ramp & End Ramp
- Deceleration Ramp
- Flow compensation
- Multi Motor Control
- Event Scheduling (RTC) with Sleep and WakeUp
- Flow Control
- Pump Clean
- Auxiliary Motor PID compensation
- Load Tuning
- Fire mode
- Power-on Resume
- Sleep, Sleep Boost, Wake-up
- Auto Torque Boost
- Lubrication Control
- Damper Control
- Level Detection
- Hysteresis Tank Level control
- Submerged Level Protection for Submersibles
- Pipe Break Detection
- Under Load Protection
- Pre-Heat
- Kinetic Energy Buffering
- Macro Setting
-
IMP – Electronic Motor Protection Relay- The IMP series of Electronic Motor Protection Relays replaces old legacy thermal overload protection.
- As a digital motor protection relay it’s highly reliable by implementing real-time data processing at high precision.
- It protects motors with various functions such as phase loss, phase reverse, unbalanced, stall, lock, ground fault, short circuit protection (depending on the model).
- It’s simple design and compactness allows it to be combined with other magnetic contactors on the same Din-rail.
- Wide Range Motors between 0.5-10 Amp or 5-100 Amp
- Operation time Thermal Inverse / Inverse / Definite
- Tunnel Type Wiring
- Output 4-20mA or RS485 Modbus RTU
- Automatic/Manual Reset
- Control 85~245V AC/DC or 24~36V AC/DC
- Ground Fault setting between 30mA~25Amp
- Compatible with Inverter Drives (Immune to harmonic noise)
- Display of Current (3ph Ampere-Meter)
- 7-Segment & Bar-Graph Display
- Event (fault) Logging
-
iS7 High Torque Performance and Precise Control Drive- Sensor Vector Control for precise speed & torque
- PLC extension with I/O & RTC
- Input 3 phase, output 3 phase
- 0.75kW ~ 375kW @ 380~480V AC
- Large Multifunction Keypad
- Communication RS485 Modbus RTU
- Communication I/O option module Ethernet-IP, Modbus-TCP, CANopen & Profibus-DP, Profi-Net, DeviceNet, LonWorks, RAPIEnet, R-Net / F-Net, CC-link
- Extension I/O Digital Input, Analog Input, PLC with Digit Input & Relay Output
- Extension Cards Encoder, Position Control, Synchronization, Safety and Auxiliary Power
- Powerful features
- Flying Start
- Ride-through (LV trip delay) for unexpected power loss
- Kinetic Energy Buffering (KEB) for a stable system stop in case of power-loss/failure
- Auto Tuning
- Automatic Torque Balance Droop Control
- Safe Torque Boost
- Power & Flux Braking for maximum deceleration
-
Convenient control with a single or multi touch! A user-oriented interface, ultra performance, and soft and quick screen swipe and respond speed to touch!- Screen sizes of 8.4", 10.4", 12.1" and 15"
- IP66 Certification with enhanced waterproofing and protection against dust
- Slim and durable design with aluminium frame and a reinforced glass
- Dual Monitor function clone/extended mode
- Multi-touch setting to prevent malfunction
- Various external interfaces to provide IoT solutions
- Ethernet 2ch., HDMI/Audio output, USB host/device, multimedia (video)
- Depending on touch sensitivity, you can set it up with bare hands or gloves
- Dual-Core CPU offers high-speed communication and processing
- High luminance/resolution LCD with an LED backlight
- 16.7M Colours
- Direct replacement for older generation iXP HMI
- Same XP-Builder Development SW across all HMIs
-
Convenient control with a 7" Handheld Touch Screen HMI with programmable function buttons!- 3-way Mode Selection Switch
- Direction (cursor) Control Button
- 3 Programmable buttons on the left
- 6 Programmable + and - buttons on the right
- Could be used for Robot axis control
- E-Stop Button
- 7" Resistive TFT LCD Screen
- 16.7M Colours
- Buzzer
- Recipe Data
- Data Logging, Alarm
- USB Host port
- Ethernet I/F
- RS-232 or RS485 I/F
- 5 or 10 meter extension cable with Junction box
- Hand grip strap and enable Switch on the left
- Same XP-Builder SW as for eXP, iXP2 & iXP HMIs
-
L7NH EtherCAT Servo Drive- Built-in EtherCAT Interface
- 100BASE-TX(100Mbps) Ethernet based real-time communication
- Precise synchronization mechanism (1us)
- Maximum 100m between nodes
- Standard RJ45 connector and cabling(CAT5), 2 ports.
- Open standard - Ensures Interoperability
- 0.1kW ~ 3.5kW 3ph @ 200~230V AC
- 1.0kW ~ 15kW 3ph @ 380~480V AC
- Rated Speeds of 1000, 1500, 2000 & 3000 RPM
- Maximum Speed 5000 RPM (depending on motor)
- High Resolution 19bit Encoder for accurate position control
- Stable low-speed properties based on precise speed measurement
- Support different encoder types
- Safe torque off (STO) function
- Notch filter for resonance suppression
- Various gain switching modes for improved control performance
- Auto gain tuning function
- Various dynamic brake control modes
- Built-in DC Reactor (0.1kW ~ 7.5kW Servos)
- Additional functions for: backup, network diagnosis, monitoring & built-in functions focused on improving efficiency
- I/O: 8x Digital In, 4x Digital Out
- Matching LSIS Motors with encoder & cables
- Standard & Robotic, power & encoder, cable lengths of 3m, 5m, 10m & 20m
- Same XG5000 Development SW as for PLCs
- Built-in EtherCAT Interface
-
M100 Micro Drive- Input 1 phase, Output 3 phase
- 0.1kW ~ 2.2kW 1ph @ 200~240V AC
- Build-in EMC filter C2
- Extension I/O Digital Input, Relay C/O & NPN Outputs and 0-10V Analog Input & Output
- DIN-rail mountable
- Side-by-side installation
- Remote Keypad
- Powerful features
- Torque Boost
- DC Breaking
- PID Control
- Energy Saving Operation
- 2nd Motor Operation
- Draw Control
- DriveView 9 Software
-
M1000 Medium Voltage Drive- LSIS medium voltage drive consists of compact integrated systems built on cutting-edge technologies, delivering optimum energy-saving solution featuring high efficiency and power factor.
- The system supports a user-friendly HMI (Human Machine Interface) that allows easy operation and displays desired information for customers maximum convenience.
- LSIS medium voltage drive offers leading industrial drive solutions with proven reliability and economic viability.
- Contributes to energy saving and environment protection in various industries including gas, water treatment, marine, power generation, and cement.
- Cascade Topology with Intelligent Low Voltage modules
- Optimised for energy saving.
- Redundant Current Sensing and Internal Fibre Optic Communications
- Faulty Power Module Auto- Bypass is a standard feature, with Phase Balancing
- 3300V~3700kVA
- 4160V~4700kVA
- 6600V~7500kVA
- 11kV~13000kVA
- Network topologies: RS485 Modbus RTU
- Protocols: ModBus RTU, LS Bus
- Optional: DeviceNet, Ethernet, ProfiBus
-
S100 High Performance Standard Drive- Input 1 phase and 3 phase, Output 3 phase
- 0.4kW ~ 2.2kW 1ph @ 200~240V AC
- 0.4kW ~ 75kW 3ph @ 380~480V AC
- IP66 enclosure - 0.4kW ~ 22kW 3ph @ 380~480V AC
- External Keypad for Panel Door mounting. 3-line display
- Communication RS485
- Communication I/O option module Ethernet-IP, Modbus-TCP, CANopen and Profibus-DP
- Extension I/O Digital Input, Relay Output & Analog Input/Output
- Powerful features
- Flying Start
- Auto Tuning
- Safe Torque Boost
-
XEC E economic PLC with essential option I/O- Maximum 32 I/O points
- Maximum 2 option modulus
- 240ns/step processing speed
- Memory 4K steps / 50KB
- Communication RS485 or RS232C build-in
- Option I/O module DC24 input, Transistor (PNP) output, Relay output, RTD input, TC input, Analog (Voltage/Current) input & output
- Option module Memory, RTC
- Supply Voltage 100-240V AC
-
XEC H High performance PLC- Maximum 384 I/O points
- Maximum 10 expansion modules
- 84ns/step processing speed
- Memory 15K steps / 200KB
- Communication RS485 and RS232C build-in
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output,
- Special expansion I/O module Load Cell input, RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
- Communication I/O expansion modules RS485, RS232C, Ethernet, CANopen (Master/Slave), Profibus-DP (Master/Slave), DeviceNet (Slave), EtherNet/IP, RAPIEnet
- Supply Voltage 100-240V AC
-
XEC SU standard performance PLC with excellent blend between economic- and ultra performance PLC.- Maximum 284 I/O points
- Maximum 7 expansion modules
- Maximum 2 option modulus
- 94ns/step processing speed
- Memory 15K steps / 200KB
- Communication RS485 and RS232C build-in
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output,
- Special expansion I/O module Load Cell input, RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
- Communication I/O expansion modules RS485, RS232C, Ethernet, CANopen (Master/Slave), Profibus-DP (Master/Slave), DeviceNet (Slave), EtherNet/IP, RAPIEnet
- Option I/O module DC24 input, Transistor (PNP) output, Relay output, RTD input, TC input, Analog (Voltage/Current) input & output
- Option module Memory, RTC
- Supply Voltage 100-240V AC
-
XEC U sets new standards in Ultimate performance with its many innovations IoT (Internet of Things) making the smart factory a reality- Web Server build-in
- Email (SMTP) build-in
- FTP Link build-in
- Data Log build-in
- SD Card slot
- RTC build-in
- Supply Voltage 100-220V AC or 24V DC
- Maximum 352 I/O points
- Maximum 2 High speed backplane expansion modules
- Maximum 10 expansion modules
- 60ns/step processing speed
- Memory 32K steps / 384KB
- Communication Ethernet (dual port), RS485 and RS232C build-in
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output,
- Special expansion I/O module Load Cell input, RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes, EtherCAT network 8 axes)
- Communication I/O expansion modules RS485, RS232C, Ethernet, CANopen (Master/Slave), Profibus-DP (Master/Slave), DeviceNet (Slave), EtherNet/IP, RAPIEnet
-
XGI E (Economic Unit)- Maximum 1,536 I/O points on-board
- Maximum 32,768 I/O via Remote I/O
- 84ns processing speed
- Memory 64KB
- Main- and expansion base with 4, 6, 8 or 12 slots
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
- Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
- Communication RS232C built-in
- Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
- Power Supply options 100-220V AC / 220V AC, 24V
-
XGI H (High Performance)- Maximum 6,144 I/O points on-board
- Maximum 131,072 I/O via Remote I/O
- 28ns processing speed
- Memory 512KB
- Main- and expansion base with 4, 6, 8 or 12 slots
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
- Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
- Communication RS232C built-in
- Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
- Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
-
XGI S (Standard Performance)- Maximum 3,072 I/O points on-board
- Maximum 32,768 I/O via Remote I/O
- 28ns processing speed
- Memory 128KB
- Main- and expansion base with 4, 6, 8 or 12 slots
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
- Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
- Communication RS232C built-in
- Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
- Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
-
XGI U (Ultra Performance)- Maximum 6,144 I/O points on-board
- Maximum 131,072 I/O via Remote I/O
- 28ns processing speed
- Memory 1024KB
- Main- and expansion base with 4, 6, 8 or 12 slots
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
- Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
- Communication RS232C built-in
- Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
- Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
-
XGI UN (Ultra Performance with Ethernet)- Ethernet i/f on CPU module
- Maximum 6,144 I/O points on-board
- Maximum 131,072 I/O via Remote I/O
- 5ns processing speed
- Memory 2048KB
- Main- and expansion base with 4, 6, 8 or 12 slots
- Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
- Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
- Communication RS232C built-in
- Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
- Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
-
XGT Infou is an User friendly open-source HMI O/S featuring many innovative aspects such as standard state of art Graphic tech , expandable and compatible Interfaces with the fast-netwroking connectivity to variety of industrial devices at easy. -
XMC EtherCAT Motion Controller- Built-in EtherCAT Interface (2x)
- 32, 16 or 8 Contol Axis Options
- CAM operation 32, 16 or 8 profile options
- 2x Encoder inputs
- Analog I/O or RS-232/485 Options
- Analog I/O: 2x AI, 2x AQ (Volt) on E32A, E16A & E08A models
- RS-232 & RS-485 on E32C model
- Digital I/O: 8x DI & 16x DQ (Tr)
- Same XG5000 Development SW as for PLCs