LSIS

>LSIS

 

LS Group is a South Korean chaebol (conglomerate). It is composed of LS Corp., E1 (LPG), and YESCO (LNG). "LS Corp." is a holding company, which comprises LS Cable & System (power & communications cables), LS Industrial Systems (electrical equipment & automation systems), LS-Nikko Copper (copper smelter & refiner) and LS Mtron (machinery & components). The company is controlled by the Koo family, the founding family of LG Group.

LS Group was spun off from LG Group in 2003. In 2010, LS Group and its subsidiaries have approximately (USD)$25.2 billion in revenue worldwide with about 100 subsidiaries in 25 countries.

LS means "Leading Solution"

 

 

  • Effective Control and Monitoring with the Cost-Efficient eXP series HMIs!
    • Simple Design
    • 4.3", 7" and 10.2" wide-screen sizes TFT color LCD
    • Wide variety of communication interfaces
    • 2~3-channel serial communication
    • Ethernet
    • Large memory for drawing (64MB)
    • RTC function (maintained by battery)
    • Convenient downloading/uploading of drawings via USB port in the front
  • HVAC, Pump and Irrigation systems benefit from outstanding energy-saving characteristics of the H100.
    • Input 3 phase, output 3 phase
    • 0.75kW ~ 500kW @ 380~480V AC Mains
    • 0.75kW ~ 500kW @ Solar 450~790V DC PV
    • Standalone, Changeover or Hybrid Modes
    • Large Keypad with exclusive for Pump and Fan with 3 line display.
    • Wireless Radio Communication via RS485 Modbus RTU
    • Communication RS485, BACnet MS/TP & Modbus-RTU, Metasys N2 build-in
    • Communication I/O option module LonWorks
    • Flange mountable for fans outside of enclosure
    • Powerful features
      • Solar 6x Delay Adjustable Voltage Retries
      • Solar Maximum Power Point Tracking (MPPT)
      • Soft Fill Operation
      • Start Ramp & End Ramp
      • Deceleration Ramp
      • Flow compensation
      • Multi Motor Control
      • Event Scheduling (RTC) with Sleep and WakeUp
      • Flow Control
      • Pump Clean
      • Auxiliary Motor PID compensation
      • Load Tuning
      • Fire mode
      • Power-on Resume
      • Sleep, Sleep Boost, Wake-up
      • Auto Torque Boost
      • Lubrication Control
      • Damper Control
      • Level Detection
      • Hysteresis Tank Level control
      • Submerged Level Protection for Submersibles
      • Pipe Break Detection
      • Under Load Protection
      • Pre-Heat
      • Kinetic Energy Buffering
      • Macro Setting
  • IMP – Electronic Motor Protection Relay  
    • The IMP series of Electronic Motor Protection Relays replaces old legacy thermal overload protection.
    • As a digital motor protection relay it’s highly reliable by implementing real-time data processing at high precision.
    • It protects motors with various functions such as phase loss, phase reverse, unbalanced, stall, lock, ground fault, short circuit protection (depending on the model).
    • It’s simple design and compactness allows it to be combined with other magnetic contactors on the same Din-rail.
    • Wide Range Motors between 0.125~100 Amp on one device
    • Operation time Thermal Inverse / Inverse / Definite
    • Tunnel Type Wiring
    • Output 4-20mA or RS485 Modbus RTU
    • Automatic/Manual Reset
    • Control 85~245V AC/DC or 24~36V AC/DC
    • Ground Fault setting between 30mA~25Amp
    • Compatible with Inverter Drives (Immune to harmonic noise)
    • Display of Current (3ph Ampere-Meter)
    • 7-Segment & Bar-Graph Display
    • Event (fault) Logging
  • iS7 High Torque Performance and Precise Control Drive
    • Sensor Vector Control for precise speed & torque
    • PLC extension with I/O & RTC
    • Input 3 phase, output 3 phase
    • 0.75kW ~ 375kW @ 380~480V AC
    • Large Multifunction Keypad
    • Communication RS485 Modbus RTU
    • Communication I/O option module Ethernet-IP, Modbus-TCP, CANopen & Profibus-DP, Profi-Net, DeviceNet, LonWorks, RAPIEnet, R-Net / F-Net, CC-link
    • Extension I/O Digital Input, Analog Input, PLC with Digit Input & Relay Output
    • Extension Cards Encoder, Position Control, Synchronization, Safety and Auxiliary Power
    • Powerful features
      • Flying Start
      • Ride-trough (LV trip delay) for unexpected power loss
      • Kinetic Energy Buffering (KEB) for a stable system stop in case of power-loss/failure
      • Auto Tuning
      • Automatic Torque Balance Droop Control
      • Safe Torque Boost
      • Power & Flux Braking for maximum deceleration
  • Convenient control with a single touch! A user-oriented interface, enhanced performance, and soft and quick screen switching and respond speed to touch!
    • Alarming
    • Logging
    • E-mail
    • View PDF
    • Scheduler
    • Script
    • Recipe
  • M100 Micro Drive
    • Input 1 phase, Output 3 phase
    • 0.1kW ~ 2.2kW 1ph @ 200~240V AC
    • Build-in EMC filter C2
    • Extension I/O Digital Input, Relay C/O & NPN Outputs and 0-10V Analog Input & Output
    • DIN-rail mountable
    • Side-by-side installation
    • Remote Keypad
    • Powerful features
      • Torque Boost
      • DC Breaking
      • PID Control
      • Energy Saving Operation
      • 2nd Motor Operation
      • Draw Control
    • DriveView 7 Software
  • M1000 Medium Voltage Drive  
    • LSIS medium voltage drive consists of compact integrated systems built on cutting-edge technologies, delivering optimum energy-saving solution featuring high efficiency and power factor.
    • The system supports a user-friendly HMI (Human Machine Interface) that allows easy operation and displays desired information for customers maximum convenience.
    • LSIS medium voltage drive offers leading industrial drive solutions with proven reliability and economic viability.
    • Contributes to energy saving and environment protection in various industries including gas, water treatment, marine, power generation, and cement.
    • Cascade Topology with Intelligent Low Voltage modules
    • Optimised for energy saving.
    • Redundant Current Sensing and Internal Fibre Optic Communications
    • Faulty Power Module Auto- Bypass is a standard feature, with Phase Balancing
    • 3300V~3700kVA
    • 4160V~4700kVA
    • 6600V~7500kVA
    • 11kV~13000kVA
    • Network topologies: RS485 Modbus RTU
    • Protocols: ModBus RTU, LS Bus
    • Optional: DeviceNet, Ethernet, ProfiBus
  • S100 High Performance Standard Drive
    • Input 1 phase and 3 phase, Output 3 phase
    • 0.4kW ~ 2.2kW 1ph @ 200~240V AC
    • 0.4kW ~ 75kW 3ph @ 380~480V AC
    • IP66 enclosure - 0.4kW ~ 22kW 3ph @ 380~480V AC
    • External Keypad for Panel Door mounting. 3-line display
    • Communication RS485
    • Communication I/O option module Ethernet-IP, Modbus-TCP, CANopen & Profibus-DP
    • Extension I/O Digital Input, Relay Output & Analog Input/Output
    • Powerful features
      • Flying Start
      • Auto Tuning
      • Safe Torque Boost
  • XEC E economic PLC with essential option I/O
    • Maximum 32 I/O points
    • Maximum 2 option modulus
    • 240ns/step processing speed
    • Memory 4K steps / 50KB
    • Communication RS485 or RS232C build-in
    • Option I/O module DC24 input, Transistor (PNP) output, Relay output, RTD input, TC input, Analog (Voltage/Current) input & output
    • Option module Memory, RTC
    • Supply Voltage 100-240V AC
  • XEC H High performance PLC
    • Maximum 384 I/O points
    • Maximum 10 expansion modules
    • 84ns/step processing speed
    • Memory 15K steps / 200KB
    • Communication RS485 and RS232C build-in
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output,
    • Special expansion I/O module Load Cell input, RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
    • Communication I/O expansion modules RS485, RS232C, Ethernet, CANopen (Master/Slave), Profibus-DP (Master/Slave), DeviceNet (Slave), EtherNet/IP, RAPIEnet
    • Supply Voltage 100-240V AC
  • XEC SU standard performance PLC with excellent blend between economic- and ultra performance PLC.
    • Maximum 284 I/O points
    • Maximum 7 expansion modules
    • Maximum 2 option modulus
    • 94ns/step processing speed
    • Memory 15K steps / 200KB
    • Communication RS485 and RS232C build-in
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output,
    • Special expansion I/O module Load Cell input, RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
    • Communication I/O expansion modules RS485, RS232C, Ethernet, CANopen (Master/Slave), Profibus-DP (Master/Slave), DeviceNet (Slave), EtherNet/IP, RAPIEnet
    • Option I/O module DC24 input, Transistor (PNP) output, Relay output, RTD input, TC input, Analog (Voltage/Current) input & output
    • Option module Memory, RTC
    • Supply Voltage 100-240V AC
  • XEC U sets new standards in Ultimate performance with its many innovations IoT (Internet of Things) making the smart factory a reality
    • Web Server build-in
    • Email (SMTP) build-in
    • FTP Link build-in
    • Data Log build-in
    • SD Card slot
    • RTC build-in
    • Supply Voltage 100-220V AC or 24V DC
    • Maximum 352 I/O points
    • Maximum 2 High speed backplane expansion modules
    • Maximum 10 expansion modules
    • 60ns/step processing speed
    • Memory 32K steps / 384KB
    • Communication Ethernet (dual port), RS485 and RS232C build-in
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output,
    • Special expansion I/O module Load Cell input, RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes, EtherCAT network 8 axes)
    • Communication I/O expansion modules RS485, RS232C, Ethernet, CANopen (Master/Slave), Profibus-DP (Master/Slave), DeviceNet (Slave), EtherNet/IP, RAPIEnet
  • XGI E (Economic Unit)
    • Maximum 1,536 I/O points on-board
    • Maximum 32,768 I/O via Remote I/O
    • 84ns processing speed
    • Memory 64KB
    • Main- and expansion base with 4, 6, 8 or 12 slots
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
    • Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
    • Communication RS232C built-in
    • Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
    • Power Supply options 100-220V AC / 220V AC, 24V
  • XGI H (High Performance)
    • Maximum 6,144 I/O points on-board
    • Maximum 131,072 I/O via Remote I/O
    • 28ns processing speed
    • Memory 512KB
    • Main- and expansion base with 4, 6, 8 or 12 slots
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
    • Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
    • Communication RS232C built-in
    • Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
    • Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
  • XGI S (Standard Performance)
    • Maximum 3,072 I/O points on-board
    • Maximum 32,768 I/O via Remote I/O
    • 28ns processing speed
    • Memory 128KB
    • Main- and expansion base with 4, 6, 8 or 12 slots
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
    • Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
    • Communication RS232C built-in
    • Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
    • Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
  • XGI U (Ultra Performance)
    • Maximum 6,144 I/O points on-board
    • Maximum 131,072 I/O via Remote I/O
    • 28ns processing speed
    • Memory 1024KB
    • Main- and expansion base with 4, 6, 8 or 12 slots
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
    • Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
    • Communication RS232C built-in
    • Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
    • Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
  • XGI UN (Ultra Performance with Ethernet)
    • Ethernet i/f on CPU module
    • Maximum 6,144 I/O points on-board
    • Maximum 131,072 I/O via Remote I/O
    • 5ns processing speed
    • Memory 2048KB
    • Main- and expansion base with 4, 6, 8 or 12 slots
    • Expansion I/O module DC24 input, Transistor (PNP & NPN) output, Relay output, Triac
    • Special expansion I/O module RTD input, TC input, Analog (Voltage/Current) input & output, Temperature Controller (RTD & TC), High-speed counter, Positioning (Line drive 2 axes)
    • Communication RS232C built-in
    • Communication I/O expansion modules RS485, RS232C, Ethernet, Profibus-DP (Master/Slave), DeviceNet (Master), EtherNet/IP, RAPIEnet, BACnet/IP
    • Power Supply options 100-220V AC / 220V AC, 24V DC and/or 5V DC
  • XGT Infou is an User friendly open-source HMI O/S featuring many innovative aspects such as standard state of art Graphic tech , expandable and compatible Interfaces with the fast-netwroking connectivity to variety of industrial devices at easy.